Fix Code 43 in Device Manager
Code 43 means a driver told Windows the device failed, so Windows stopped it. The first fix is to uninstall the device in Device Manager, restart or choose Action, Scan for hardware changes, then install the newest driver from Windows Update or your PC maker. Microsoft's Device Manager error code article and Intel's Code 43 article give the official steps.
Checked November 3, 2026 against the manufacturer's own pages.
The short version
What to install and where it comes from. Every link goes to the manufacturer or Microsoft, never to a copy.
Official files only, nothing bundled
Step by step
Unplug extras and do a cold restart
Disconnect docks, hubs and adapters. Shut the PC down fully, remove the power cable (and the battery if it comes out), wait, then power on. Intel lists a cold reboot as its first step for Wi-Fi and Bluetooth devices.
Download the right driver before you uninstall
Get the newest driver for the device from your PC or laptop maker's support page for your model. Intel says to use the system maker's graphics driver because it is customized for that PC.
Uninstall the device in Device Manager
Right-click Start, open Device Manager, right-click the device with the warning icon and choose Uninstall device. Tick the option to remove the driver software if it is shown, then restart.
Let Windows find it again
After the restart, open Device Manager and choose Action, Scan for hardware changes. A graphics chip should now show as Microsoft Basic Display Adapter, which tells you the old driver is gone.
Install the driver you downloaded
Run the maker's installer, restart, and check Device status in the device's Properties. Then run Windows Update so any linked firmware or chipset updates also install.
Test the hardware if Code 43 returns
Try the device in another port or another PC, connect a monitor straight to the graphics output without converters, and update the BIOS from your PC maker. If it still fails, contact the maker.
Faster option: update drivers automatically
The steps above fix this one device. If several drivers are old, a driver updater finds and installs them all in one go, and backs up the current ones first.
1. Scan. Download the free version and run a scan.
2. Review. See each old or missing driver with its newer version.
3. Update. Update one driver free, or all at once with Pro.
Update this driver automatically
Finds and updates this driver and every other outdated driver on your PC.
Auslogics Driver Updater · Free scan · Windows 11, 10, 8, 7 · Backup before every change
What does Code 43 mean?
Microsoft’s message is “Windows has stopped this device because it has reported problems. (Code 43)”. The Learn reference explains the cause in developer terms: one of the drivers in the device stack answered a Plug and Play state query by reporting the device as failed. In practice, Windows did not decide on its own that something broke. A driver told it so, which is why a fresh driver often clears the code, and why a faulty part can also trigger it.
Code 43 on NVIDIA, AMD and Intel graphics
Graphics adapters are the most searched Code 43 case. The order that works best is the same for all three chip makers: PC maker’s driver first, then the chip maker’s.
| Graphics chip | Where to get the driver | Clean install option |
|---|---|---|
| Intel HD, UHD, Iris Xe | PC maker first, then Intel | Intel’s article: uninstall Intel Graphics and Intel Display Audio until Microsoft Basic Display Adapter shows |
| NVIDIA GeForce | PC maker for laptops, then NVIDIA drivers page | Custom install, then Perform a clean installation |
| AMD Radeon | PC maker for laptops, then AMD drivers and support | Uninstall in Device Manager, then run AMD’s installer |
Intel adds two details worth knowing. Disconnect from the internet during the reinstall so Windows does not put the old driver back. If the code persists, remove third-party video adapters, converters, hubs and docks, and connect the display directly, for example HDMI to HDMI. On a desktop card, also check that the PCIe power cables are firmly seated.
Code 43 on USB devices
A USB device with Code 43 often shows in Device Manager under Universal Serial Bus controllers with a generic name. Start with the physical side: a different cable, a rear port on a desktop, and no unpowered hub. Then uninstall the device and scan for hardware changes. If several USB devices fail, update the chipset and USB controller drivers from your PC maker, since those controllers carry every port. Our USB device not recognized guide covers the related error message.
Code 43 on Bluetooth adapters
Bluetooth radios are usually part of a combined Wi-Fi and Bluetooth card. Intel’s article for its wireless cards lists Code 43 and notes it often follows a Windows Update that changed Wi-Fi or Bluetooth drivers. Intel’s order is a cold reboot, a clean driver install, checking that Bluetooth is enabled in the BIOS, then a BIOS update from the PC maker. Microsoft’s Bluetooth guide adds a simple test: uninstall the adapter, shut down fully and power on so Windows reinstalls it.
Questions
Is Code 43 a hardware or a driver problem?
It can be either. Intel lists both hardware problems and corrupted drivers or settings as causes for its graphics. A code that returns after a clean reinstall and in another PC points to hardware.
Why does my NVIDIA card show Code 43 after a driver update?
The new driver failed to start the card or reported it as failed. Reinstall the newest driver for your card from NVIDIA or your PC maker using the installer's clean installation option, and check the card's power connectors.
Can a USB device give Code 43 when the cable is bad?
Yes, a device that cannot talk to Windows properly can be reported as failed. Try a different cable and a port directly on the PC, not a hub, before reinstalling drivers.
Does Code 43 happen on Windows 10 and Windows 11?
Yes. Microsoft's support article covers both, and Intel's graphics article was written for Windows 10 64-bit. The steps are the same on Windows 11.