Fix Code 10: device cannot start

Code 10 means a driver in the device's stack failed when Windows tried to start the device. Update the driver first: open the device's Properties in Device Manager, choose the Driver tab, then Update driver, and use the PC maker's driver if Windows finds nothing. Microsoft's Device Manager error code article lists this as the recommended fix.

Checked November 3, 2026 against the manufacturer's own pages.

The short version

What to install and where it comes from. Every link goes to the manufacturer or Microsoft, never to a copy.

Generic messageThis device cannot start. Try upgrading the device drivers for this device. (Code 10)
Developer nameCM_PROB_FAILED_START
Custom textA FailReasonString value can replace the generic message
Often followsA Windows Update that changed Wi-Fi or Bluetooth drivers
Microsoft Support: Error codes in Device Manager (Code 10)support.microsoft.comMicrosoft Learn: Code 10 CM_PROB_FAILED_STARTlearn.microsoft.comIntel: Error codes 10, 22, 28, 31, 39, 43, 45 or 48 for Intel Wi-Fi or Bluetoothintel.comIntel: Clean installation of wireless Wi-Fi driversintel.com

Official files only, nothing bundled

Step by step

  1. Power off completely

    Shut down, unplug the charger or power cable, take out the battery if your laptop allows it, wait a short while and start again. Intel lists this cold reboot as the first step for its wireless cards.

  2. Update from the Driver tab

    Right-click Start, open Device Manager, double-click the failing device, open the Driver tab and choose Update driver, then Search automatically for drivers.

  3. Check Windows Update optional drivers

    Open Settings, Windows Update, Advanced options, Optional updates and install any driver offered for the device, then restart.

  4. Use the PC maker's driver

    Download the driver for your exact model from the laptop or motherboard maker's support page. Intel suggests testing the PC maker's driver first and using its own generic driver only if the code remains.

  5. Do a clean reinstall

    In Device Manager, right-click the device, choose Uninstall device and tick the option to delete the driver. Repeat until that box no longer appears, restart, then run the installer you downloaded.

  6. Update or reset the BIOS

    Ask your PC maker for a BIOS update, or load BIOS defaults. For Bluetooth, check in BIOS setup that the Bluetooth component is enabled.

Faster option: update drivers automatically

The steps above fix this one device. If several drivers are old, a driver updater finds and installs them all in one go, and backs up the current ones first.

  1. Driver Updater scan listing outdated drivers1. Scan. Download the free version and run a scan.
  2. Missing driver found with the newest version2. Review. See each old or missing driver with its newer version.
  3. Update complete with every driver updated3. Update. Update one driver free, or all at once with Pro.

Update this driver automatically

Finds and updates this driver and every other outdated driver on your PC.

Auslogics Driver Updater · Free scan · Windows 11, 10, 8, 7 · Backup before every change

Why does Windows say this device cannot start?

Every device runs a stack of drivers. When Windows sends the start request, each driver in that stack has to accept it. Microsoft Learn explains that Code 10 is set when one of them fails, and that with many drivers in the stack it can be hard to tell which one. That is why Microsoft’s support article keeps the advice simple: update the driver. A newer package replaces every file in the stack at once.

Code 10 on a Wi-Fi adapter (Intel example)

Wi-Fi adapters, listed under Network adapters, are a frequent Code 10 case. Intel has one article that covers Code 10 alongside other codes for its Wi-Fi and Bluetooth cards. It says the yellow warning icon usually appears after a Windows Update or a network disconnection. Intel’s order is:

  1. Cold reboot with all power removed.
  2. Identify the adapter and do a clean driver install.
  3. Make sure wireless is switched on.
  4. Update the BIOS, then try resetting it to defaults.
  5. Install all Windows updates and restart.
  6. Use a restore point from before the problem, or reset the PC as a last step.

Intel’s clean install article says to download the new driver before you uninstall, because you lose Wi-Fi once the old one is removed. It also notes Windows keeps an inbox driver that cannot be removed, so you may see a basic adapter appear after the uninstall.

Code 10 on Bluetooth

On most laptops the Bluetooth radio shares a card with Wi-Fi, so a Bluetooth Code 10 often clears with the same combined driver package from the PC maker. Install the Bluetooth driver that matches your Wi-Fi card’s maker. Then check that Bluetooth is enabled in BIOS setup, an item Intel lists in its steps.

Code 10 on audio devices

Audio devices with Code 10 usually sit under Sound, video and game controllers. Run Windows Update first, then get the audio driver listed for your exact model on the PC maker’s support page, and restart after installing it. If a USB headset shows Code 10, try another port and remove any hub before you change drivers.

Questions

Why does Code 10 sometimes show a different message?

If the device's hardware registry key holds a FailReasonString value, Windows shows that maker-supplied text instead of the generic Code 10 line. The fix is the same.

Does Code 10 mean my Wi-Fi card is dead?

Not usually. Intel says the warning often appears after a recent Windows update or a network disconnection. Suspect the card only if a clean driver install and a BIOS update both fail.

Can I roll back instead of updating?

Yes. If Code 10 started right after a driver update, open the Driver tab and choose Roll Back Driver when it is available, then restart.

What is the developer detail behind Code 10?

Microsoft Learn says one driver in the stack failed the start request. The device's DEVPKEY_Device_ProblemStatus property holds the failure code that driver returned.