Recover files from a formatted USB drive

If the format was a quick format, your files are usually still on the stick. Copy nothing to it, then run Windows File Recovery in Extensive mode with the USB drive as the source and another drive as the target. If it was a full format on Windows Vista or later, Microsoft says the whole disk is written with zeros, and no tool can bring those files back.

Checked November 10, 2026 against the manufacturer's own pages.

The short version

What to install and where it comes from. Every link goes to the manufacturer or Microsoft, never to a copy.

Quick formatNew file table only, old data not overwritten
Full format (Vista and later)Writes zeros to the whole volume
Default in File ExplorerQuick Format box ticked
winfr mode after a formatExtensive, for NTFS, FAT and exFAT
Chance of recoveryFair after quick format, none after full format
Microsoft: recover lost files with Windows File Recoverysupport.microsoft.comMicrosoft Learn: format command behavior in Windows Vista and laterlearn.microsoft.comMicrosoft: Disk Management in Windowssupport.microsoft.com

Official files only, nothing bundled

Step by step

  1. Leave the stick empty

    Do not copy anything onto the newly formatted drive, and do not let a backup app or a camera use it. The fresh file table says the space is free, so any new file can be written over your old ones.

  2. Work out which format it was

    Think back to the Format window. If Quick Format was ticked, which is the default in File Explorer, the old data is still there. If you cleared the box, or a format of a large stick took many minutes, assume a full format.

  3. Check for other copies

    Before scanning, look for the same files in OneDrive, in email attachments you sent, and on the PC where you first created them. A copy that already exists is faster and complete.

  4. Scan the stick with Windows File Recovery

    Install winfr from the Microsoft Store and open it as administrator. With the stick on F:, type winfr F: C: /extensive and press Enter. Narrow it with filters such as /n *.docx /n *.pdf /n *.jpg so the scan returns only what you need.

  5. Check the recovered files

    Open the Recovery folder that winfr creates on C:. Old folder names are usually lost after a format, so sort by file type and size. Open each important file to confirm it is whole.

  6. Use a recovery program if winfr misses files

    A file recovery program that scans the raw sectors of the USB drive may list more files, including some that winfr skips. It cannot help after a full format, because the old content was replaced with zeros.

If the free methods found nothing

Deleted files usually stay on the drive until new data overwrites them. A recovery program reads the drive directly, lists what can still be saved and lets you preview it before restoring. Save recovered files to a different drive.

Find and preview your deleted files

Scans hard drives, USB sticks and memory cards, including quick-formatted ones, and shows what can be recovered.

Auslogics File Recovery 12 · Free scan and preview · NTFS, FAT, exFAT · Windows 11, 10, 8, 7

Quick format and full format are very different for recovery

A quick format writes a new, empty file table at the start of the drive and stops. Microsoft’s Disk Management page says it creates a new file table but will not fully overwrite or erase the volume. Your photos, documents and videos are still in the data area, they just have no names or folders pointing at them. That is the case recovery tools are built for.

A full format in Windows Vista, 7, 8, 10 or 11 goes much further. Microsoft documents that the format command writes zeros to the whole disk in a full format. Every old byte is replaced, so nothing remains to scan for. Be honest with yourself about which one you ran before spending hours on scans.

Why so many recovered files have no names

After a format the old folder tree is gone. Windows File Recovery and other tools then find files by their content, not by their old listing. A Word file still looks like a Word file inside, and a JPEG still starts the way every JPEG does, so the tool can name it by type. What it cannot do is give back the folder it lived in or the original file name in every case. Plan time to sort the results.

Large files that were split across the stick can also come back damaged, because the map of their pieces lived in the file table that was replaced.

How to stop this happening again

Before you format any drive, open it and look at what is on it. Check the drive letter and size in the Format window twice, since a USB stick and an external backup drive can sit side by side in the list. Keep anything that matters in at least two places, such as the PC and OneDrive, so a wrong click on one stick is never the only copy.

Questions

How do I know if Windows did a quick format?

The Format dialog in File Explorer and in Disk Management has a box called Perform a quick format or Quick Format. It is ticked by default. A quick format finishes in seconds, while a full format reads and writes every sector and takes much longer.

I formatted the stick from FAT32 to NTFS. Does that change anything?

A quick format to a different file system still leaves most old data in place, but the new tables can cover the start of the drive. Use Extensive mode, which Microsoft lists for formatted NTFS drives and for FAT and exFAT.

Can a full format be undone?

No. Microsoft's own article on the format command says Windows Vista and later write zeros to the whole disk in a full format. Once a sector holds zeros, the old file is gone.

Windows formatted my USB drive by itself. What happened?

Windows does not format a drive on its own. Usually someone clicked Format disk after a message saying the disk needs formatting. That message points to a RAW or corrupted file system, covered in its own guide.