Recover files from a corrupted USB drive
Copy every file that still opens to your PC first. Then run Windows File Recovery in Extensive mode, which Microsoft recommends for a corrupted disk, saving to a different drive. Run chkdsk /f only after that, because repairs on FAT drives can lose data. Corrupted file tables are often recoverable; a stick that keeps disconnecting is a hardware fault.
Checked November 10, 2026 against the manufacturer's own pages.
The short version
What to install and where it comes from. Every link goes to the manufacturer or Microsoft, never to a copy.
Official files only, nothing bundled
Step by step
Do not click Format or Scan and fix yet
If Windows offers to scan and fix the drive or to format it, close the message. Both change the file system before you have rescued anything.
Copy what you can read
Open the stick in File Explorer and drag folders that still open to a folder on C:. If one file stops the copy with an error, skip it and copy the rest. A slow copy is fine. A stick that vanishes during copying is a sign of a hardware fault.
Scan with winfr in Extensive mode
Install Windows File Recovery from the Microsoft Store. Open it as administrator and, for a stick on G:, type winfr G: C: /extensive /n *.docx /n *.xlsx /n *.pdf /n *.jpg. Microsoft lists Extensive as the mode for corrupted disks.
Let chkdsk repair the stick
When your files are safe on another drive, open Command Prompt as administrator and type chkdsk G: /f. On FAT32 or exFAT it may ask to convert lost chains to files. Choose Y, and check the root of the stick for files named File0000.chk and up.
Look inside the .chk files
These files are pieces chkdsk could not place in a folder. Copy them to the PC and try renaming one to .jpg, .pdf or .docx based on what you lost. Some will open, many will not.
Try a recovery program last
If key files are still missing, a recovery program that reads the stick sector by sector may find more. Stop and use a data recovery service if the stick gets hot, disconnects, or is not listed in Disk Management at all.
If the free methods found nothing
Deleted files usually stay on the drive until new data overwrites them. A recovery program reads the drive directly, lists what can still be saved and lets you preview it before restoring. Save recovered files to a different drive.
Find and preview your deleted files
Scans hard drives, USB sticks and memory cards, including quick-formatted ones, and shows what can be recovered.
Auslogics File Recovery 12 · Free scan and preview · NTFS, FAT, exFAT · Windows 11, 10, 8, 7
Logical damage versus a dying stick
A corrupted USB drive usually has damage in its file system, not in the memory chips. The table that lists file names and where their pieces live has wrong entries, so Windows shows garbage names, empty folders or wrong sizes. The data itself is often fine. Tools that read past the broken table can rebuild files from what is still there.
A stick with failing flash memory behaves differently. It drops off the PC during copying, shows a size of 0 bytes, gets very hot, or turns read only. Scanning such a stick for hours wears it out further. Copy the most important files first, in small batches, and stop if the drive disappears. A data recovery service can read the chips directly when the controller has failed.
Why the order of the steps matters
chkdsk is a repair tool, not a recovery tool. It makes the file system consistent again, and it does that by deciding what to keep. Microsoft’s own documentation on chkdsk explains that on FAT drives it may turn lost allocation units into files named with a .chk extension, or free them if you answer N. Either way the original names are gone. Running it after you have copies costs you nothing. Running it first can cost you the folder structure that a recovery scan could have read.
Avoid corruption next time
Always eject the stick in Windows before you pull it out. Avoid editing files directly on the stick; copy them to the PC, work there, and copy back. Replace sticks that have thrown errors once, since flash memory does not heal. Keep a second copy of anything on a USB drive in OneDrive or on the PC.
Questions
What corrupts a USB drive?
The most common cause is pulling the stick out while Windows is still writing to it. Power cuts, a loose port, and worn out flash memory in cheap or old sticks also cause it. Use Safely Remove Hardware or eject before unplugging.
Does chkdsk delete files?
It can lose data on FAT drives. Microsoft's chkdsk page notes that repairs on FAT file systems change the allocation table and sometimes cause a loss of data. That is why copying and scanning come first.
The drive shows the right size but all folders look empty. Is it corrupted?
It might be, or the files might be hidden. In File Explorer, turn on hidden items on the View menu. If they appear, copy them off. If not, follow the scan steps above.
Can I fix a USB stick that is write protected after errors?
Many flash drives lock themselves to read only when the memory starts to fail. That protects your data. Copy everything off while it still reads, then replace the stick.