Recover files from a RAW drive
When Windows says you need to format the disk before you can use it, choose Cancel. RAW means Windows cannot read the file system, not that the files are gone. Scan it with Windows File Recovery in Extensive mode, which Microsoft says works with all file systems, and save to another drive. Format only after your files are safe.
Checked November 10, 2026 against the manufacturer's own pages.
The short version
What to install and where it comes from. Every link goes to the manufacturer or Microsoft, never to a copy.
Official files only, nothing bundled
Step by step
Cancel the format message
The pop up reads You need to format the disk in drive X before you can use it. Choose Cancel every time it appears. Formatting writes a new file system over the old one.
Confirm RAW in Disk Management
Right-click Start and open Disk Management. Find the drive by its size. If the volume shows RAW where NTFS, FAT32 or exFAT normally appears, the file system is unreadable. If the whole disk is missing or shows Unknown, the problem is the hardware or the connection.
Try another port, cable or PC
A loose USB cable or a weak port can make a healthy drive read as RAW. Plug it into a rear port on a desktop or into another computer before scanning anything.
Recover with winfr Extensive mode
Install Windows File Recovery from the Microsoft Store and run it as administrator. For a RAW drive with the letter H:, type winfr H: C: /extensive and press Enter. winfr needs a drive letter as its source, so if the RAW volume has none, add one in Disk Management with Change Drive Letter and Paths.
Use a recovery program that rebuilds the volume
Some file recovery programs can read the damaged NTFS or exFAT structures and show the old folder tree, which winfr cannot do on a RAW drive. Save everything they find to another disk.
Format and copy back
Once your files open from the other drive, format the RAW volume in Disk Management with NTFS for an internal or backup disk, or exFAT for a stick or card. Then copy the files back.
If the free methods found nothing
Deleted files usually stay on the drive until new data overwrites them. A recovery program reads the drive directly, lists what can still be saved and lets you preview it before restoring. Save recovered files to a different drive.
Find and preview your deleted files
Scans hard drives, USB sticks and memory cards, including quick-formatted ones, and shows what can be recovered.
Auslogics File Recovery 12 · Free scan and preview · NTFS, FAT, exFAT · Windows 11, 10, 8, 7
RAW is a reading problem, not an empty disk
Every drive starts with a small area that tells Windows which file system it uses and where the list of files lives. If that area is damaged, Windows has nothing to go on and labels the volume RAW. The photos, documents and backups after that point are usually untouched. That is why the format prompt is so dangerous: it offers a quick fix that turns a readable situation into a harder one.
Microsoft’s Windows File Recovery offers Extensive mode for all file systems and an advanced Signature mode that, in Microsoft’s words, uses file headers. A header scan ignores the broken file table and looks for the start of known file types, such as JPEG, PDF, ZIP and Office files. It finds files by type, so names and folders often do not come back.
When a RAW drive is a hardware warning
A drive that turned RAW after a drop, makes new noises, or takes minutes to appear in Disk Management may have physical damage. External drives can also fail at the small adapter board between the USB port and the disk. If you can safely remove the disk from its case, connecting it with a different adapter sometimes brings the file system straight back. If the disk is not detected anywhere, or clicks, stop and send it to a data recovery lab rather than retrying.
Keep it from happening again
Eject drives before unplugging them. Plug desktop external disks into their own power supply. Keep File History or another backup running on a second drive, so a RAW volume is an annoyance rather than a loss. If you use BitLocker on removable drives, save the recovery key to your Microsoft account.
Questions
Can chkdsk fix a RAW drive?
It may not run at all on a volume with no readable file system. Even when it runs, chkdsk is a repair tool that may discard damaged entries. Recover files first and treat chkdsk as an optional last step.
Why did my drive turn RAW?
Common causes are unplugging during a write, a power cut, a failing USB to SATA bridge inside an external case, bad sectors at the start of the disk, and encryption that Windows cannot unlock. A BitLocker drive can look like an unknown file system until you enter its key.
Will formatting the RAW drive delete my files?
A quick format replaces the file table and makes recovery harder, and a full format in current Windows writes zeros over the whole volume. Do not format until the files are safe.
The RAW drive clicks or beeps. What now?
Stop. Unplug it and do not run scans. Clicking or beeping drives have a mechanical fault, and every spin can scratch the platters. A professional data recovery lab is the safe option.