Fix Inaccessible Boot Device

INACCESSIBLE_BOOT_DEVICE (bug check 0x0000007B) means Windows lost access to the system partition while starting. If you changed the BIOS controller mode, for example between AHCI, RAID and legacy, change it back first. Then remove new disks or controllers and use Safe Mode, Startup Repair or System Restore. Microsoft's bug check 0x7B reference covers both cases.

Checked November 3, 2026 against the manufacturer's own pages.

The short version

What to install and where it comes from. Every link goes to the manufacturer or Microsoft, never to a copy.

Bug check value0x0000007B
When it appearsAlways during startup
Usual triggersBIOS controller mode change, new disk controller, failed disk
Drivers involvedstorahci, storport, disk, partmgr, NTFS, or iaStorA
Microsoft Learn: Bug Check 0x7B INACCESSIBLE_BOOT_DEVICElearn.microsoft.comMicrosoft Support: Windows Recovery Environmentsupport.microsoft.comMicrosoft Support: Troubleshoot blue screen errorssupport.microsoft.com

Official files only, nothing bundled

Step by step

  1. Undo the last BIOS change

    Open UEFI setup (often Esc, Del or F2 at power on). If the SATA or storage controller mode was changed, for example from legacy to AHCI or between AHCI and RAID, set it back. Microsoft lists this as a first fix.

  2. Remove new drives and controllers

    Shut down and take out any disk, NVMe adapter or controller card you just installed. If the PC boots without it, ask that part's maker for a firmware or driver update before you refit it.

  3. Try Safe Mode once, then a normal start

    From the recovery menu choose Troubleshoot, Advanced options, Startup Settings, Restart, and pick 4. Microsoft explains that Safe Mode loads a core set of storage drivers, which can let the next normal start find the disk again.

  4. Run Startup Repair or System Restore

    In Troubleshoot, Advanced options, run Startup Repair. If it cannot fix it, use System Restore and pick a point from before the error, or Uninstall Updates if the error began after an update.

  5. Check the disk and system files

    Once Windows starts, right-click the drive in File Explorer and choose Properties, Tools, Check. Then run sfc /scannow from an administrator Command Prompt. Microsoft lists both for 0x7B.

  6. Update the storage driver, BIOS and SSD firmware

    In Device Manager, look under Storage controllers for warning icons. Install controller drivers from Windows Update or your PC maker, then the BIOS and SSD firmware updates for your model.

Faster option: update drivers automatically

The steps above fix this one device. If several drivers are old, a driver updater finds and installs them all in one go, and backs up the current ones first.

  1. Driver Updater scan listing outdated drivers1. Scan. Download the free version and run a scan.
  2. Missing driver found with the newest version2. Review. See each old or missing driver with its newer version.
  3. Update complete with every driver updated3. Update. Update one driver free, or all at once with Pro.

Update this driver automatically

Finds and updates this driver and every other outdated driver on your PC.

Auslogics Driver Updater · Free scan · Windows 11, 10, 8, 7 · Backup before every change

What causes INACCESSIBLE_BOOT_DEVICE?

Microsoft says the error often comes from a boot device failure: during startup, the boot device driver could not initialize the disk. It can also happen when the file system does not recognize the data on the disk. Repartitioning the system partition, changing the BIOS configuration or installing a disk controller can all trigger it. Incompatible disk hardware, a controller that needs a driver Windows does not have at startup, and storage that has simply failed are the remaining causes Microsoft lists.

Because the crash happens so early, logs are often empty. Microsoft notes the operating system may not have started far enough to write them, so the steps above rely on recovery tools rather than Event Viewer.

Which storage driver files matter here?

Microsoft’s reference lists the drivers that must load for Windows to reach the system disk. These are the names you may meet in a dump or in Device Manager:

Driver What it does Maker
storahci.sys Standard SATA AHCI controller driver Microsoft, built in
storport.sys Storage port driver many controllers sit on Microsoft, built in
iaStorA.sys Intel SATA RAID controller driver Intel, via the PC maker
disk.sys, partmgr.sys, ntfs.sys Disk, partition and file system drivers Microsoft, built in

If iaStorA.sys is in use and you switch the BIOS to AHCI, or the reverse, the driver Windows expects is not the one the hardware needs. That mismatch is the textbook case for 0x7B.

Windows 10 and Windows 11 differences

The fix is the same on both. Only the path to the recovery menu from inside Windows differs: Settings, System, Recovery on Windows 11, and Settings, Update & Security, Recovery on Windows 10. When Windows cannot start, both open the recovery menu on their own after repeated failed starts.

Questions

Is INACCESSIBLE_BOOT_DEVICE a dead hard drive?

Not always. Microsoft names failed storage hardware as one cause, but also BIOS configuration changes, repartitioning, a new disk controller and file system damage. Check the drive maker's diagnostics before you replace it.

I switched to AHCI or RAID in the BIOS. Is that the cause?

Very likely. Windows loads the storage driver that matches the mode it was installed in. Microsoft says to revert controller mode changes such as legacy to AHCI. Put the setting back and Windows should start.

Can a Windows update cause INACCESSIBLE_BOOT_DEVICE?

An update that changes a storage driver can leave the boot disk unreachable. Use Uninstall Updates in the recovery menu, then check Windows release health notes before you install it again.

What if nothing in the recovery menu works?

Microsoft suggests using the Media Creation Tool on another PC to make a USB installer and running a clean install. Copy your files off the drive first, from the recovery Command Prompt or by connecting it to another PC.