Stop Bluetooth disconnecting

Bluetooth that keeps dropping on Windows 11 is usually caused by power saving. In Device Manager, open your Bluetooth adapter's Properties, Power Management tab and clear Allow the computer to turn off this device to save power, then turn off Energy Saver. Microsoft's guide also has you restart the Bluetooth Support Service and update the adapter driver.

Checked November 3, 2026 against the manufacturer's own pages.

The short version

What to install and where it comes from. Every link goes to the manufacturer or Microsoft, never to a copy.

Power settingDevice Manager > Bluetooth > adapter > Properties > Power Management
Service to restartBluetooth Support Service (services.msc)
Remove a deviceSettings > Bluetooth & devices > Devices > More options
Radio band2.4 GHz, shared with 2.4 GHz Wi-Fi
Microsoft: Bluetooth keeps disconnecting in Windowssupport.microsoft.comMicrosoft: fix Bluetooth problems in Windowssupport.microsoft.comDell: Bluetooth power save setting causing connectivity issuesdell.comIntel Wireless Bluetooth drivers for Windows 10 and 11intel.com

Official files only, nothing bundled

Step by step

  1. Stop Windows turning the adapter off

    Right-click Start and open Device Manager. Expand Bluetooth, right-click the adapter (often named Intel Wireless Bluetooth or Realtek Bluetooth Adapter) and choose Properties. On Power Management, clear the box that lets the computer turn it off to save power, then press OK.

  2. Turn off Energy Saver

    Select the battery icon on the taskbar. If Energy Saver is on, switch it off and test the headset or mouse again.

  3. Restart the Bluetooth Support Service

    Press Windows key and R, type services.msc and press OK. Find Bluetooth Support Service, right-click it and choose Restart.

  4. Remove and pair again

    Go to Settings, Bluetooth & devices, Devices. Select More options next to the device, choose Remove device, then put the device in pairing mode and add it again with Add device.

  5. Cut down interference

    Keep the device within range, move USB 3.0 drives and hubs away from the PC's adapter, and join your router's 5 GHz network if it has one.

  6. Update the Bluetooth driver

    Run Windows Update first. If drops continue, install the Bluetooth driver for your model from the PC maker's support page, or Intel's Bluetooth package for Intel adapters.

Faster option: update drivers automatically

The steps above fix this one device. If several drivers are old, a driver updater finds and installs them all in one go, and backs up the current ones first.

  1. Driver Updater scan listing outdated drivers1. Scan. Download the free version and run a scan.
  2. Missing driver found with the newest version2. Review. See each old or missing driver with its newer version.
  3. Update complete with every driver updated3. Update. Update one driver free, or all at once with Pro.

Update this driver automatically

Finds and updates this driver and every other outdated driver on your PC.

Auslogics Driver Updater · Free scan · Windows 11, 10, 8, 7 · Backup before every change

Why does Bluetooth keep disconnecting on Windows 11?

Microsoft lists three usual causes: power saving settings, an outdated driver and short lived system glitches. Power saving is the one to fix first. Windows can switch the Bluetooth radio off for a moment to save battery, and a headset or mouse reads that as a lost link. Dell’s support article about mice and keyboards that drop out points to the same Power Management box on the adapter.

A drop every few minutes points to power saving or interference. A drop only after sleep points to the driver or the BIOS, so get both from your PC maker. A drop that follows one device to any PC is a fault in that device, and its own firmware update or a reset is the fix.

Wi-Fi and Bluetooth on the same 2.4 GHz band

Bluetooth and older Wi-Fi share the 2.4 GHz band. Intel’s Bluetooth FAQ says its adapters can run both at the same time, but it suggests 5 GHz Wi-Fi where possible to prevent interference between them. In most laptops one combo card handles both radios through one antenna set, so a busy 2.4 GHz network, a microwave oven in use or a crowded office can break up the Bluetooth link. Microsoft also notes that unshielded USB 3.0 devices near the adapter can interfere.

Which Bluetooth driver to install

Follow Microsoft’s order: Windows Update, then the PC maker, then the chip maker. Laptops from Dell, HP and Lenovo list a Bluetooth driver on each model’s support page. Intel publishes one Bluetooth package for its own adapters on Windows 10 and 11. For a Realtek or MediaTek adapter, take the driver from the PC maker’s page for your model. Install the Wi-Fi driver from the same source at the same time, because both radios share one chip.

Questions

Why do my AirPods keep disconnecting from my PC?

AirPods use standard Bluetooth on Windows, so the same fixes apply. Remove them in Settings, put them back in the case, hold the case button until the light flashes white, then add them again. Turn off power saving on the PC's adapter.

Why are my Bluetooth headphones not connecting at all?

A pairing that half failed often blocks a new attempt. Remove the headphones from Settings, reset them as their maker's manual describes, and pair them as a new device. Make sure they are not still connected to a phone.

There is no Power Management tab on my Bluetooth adapter. What now?

Some adapters do not show it. Turn off Energy Saver, keep the laptop on mains power while you test, and install the PC maker's Bluetooth driver, which can change how the adapter handles sleep.

Bluetooth drops only when I download or stream over Wi-Fi.

Wi-Fi on 2.4 GHz and Bluetooth share the same band. Intel recommends 5 GHz Wi-Fi where possible to avoid interference between the two. Most Wi-Fi and Bluetooth sit on the same combo card, so update both drivers together.