Fix boot error 0xc0000225

0xc0000225 is STATUS_NOT_FOUND, 'The object was not found.' Windows Boot Manager could not find something it needs to start Windows: the boot configuration data (BCD), a boot driver, or the system registry file. Boot from Windows installation media, choose Repair your computer, Troubleshoot, Advanced options, Startup Repair. If that fails, rebuild the BCD with bootrec /rebuildbcd.

Checked November 10, 2026 against the manufacturer's own pages.

The short version

What to install and where it comes from. Every link goes to the manufacturer or Microsoft, never to a copy.

Code0xc0000225
Official nameSTATUS_NOT_FOUND: The object was not found.
Where it appearsWindows Boot Manager screen or the blue Recovery screen, before Windows loads
Info lines Microsoft listsBoot selection failed because a required device is inaccessible; a critical system driver is missing; the system registry file is missing
Windows versionsWindows 11, Windows 10 and Windows Server
Microsoft Learn: NTSTATUS values (0xC0000225 STATUS_NOT_FOUND)learn.microsoft.comMicrosoft Learn: Windows startup issues troubleshootinglearn.microsoft.comMicrosoft Learn: Troubleshoot Windows Boot Manager error 0xC0000225 Status not foundlearn.microsoft.comMicrosoft Learn: BCDBoot command-line optionslearn.microsoft.com

Official files only, nothing bundled

Step by step

  1. Read the File and Info lines on the screen

    Write down the File line, if one is shown, and the Info line. A .sys file means a damaged driver. No file plus a required device is inaccessible means the BCD. A path ending in config\system means the registry hive.

  2. Unplug extra drives and boot from the right disk

    Disconnect USB drives, SD cards and docks. Open the firmware setup (often F2, F10 or Del at power on) and check that Windows Boot Manager or the Windows drive is first in the boot order.

  3. Run Startup Repair from installation media

    Make a Windows 11 USB on another PC with Microsoft's media creation tool. Boot from it, select Next, Repair your computer, Troubleshoot, Advanced options, Startup Repair. The log is saved to Srttrail.txt in System32, LogFiles, Srt.

  4. Scan for Windows and rebuild the BCD

    From the same media press Shift+F10. Run bootrec /scanos and restart. If the error stays, run bcdedit /export c:\bcdbackup, then attrib c:\boot\bcd -r -s -h, ren c:\boot\bcd bcd.old and bootrec /rebuildbcd, as Microsoft's startup guide shows.

  5. Recreate the boot files with bcdboot

    On UEFI PCs, run diskpart, then list vol, then exit to find the Windows drive letter. Then run bcdboot followed by that letter and the Windows folder, for example bcdboot D:\Windows, and restart.

  6. Check the disk for errors

    Run chkdsk with the Windows drive letter and /f /r. A drive with bad sectors can lose the very file Boot Manager is looking for.

The three messages that come with 0xc0000225

Microsoft’s article on this code shows the Windows Boot Manager screen in three versions, and each points to a different repair.

What the screen shows What is missing First fix
File: a .sys driver, Info: a critical system driver is missing or contains errors A boot driver chkdsk on the Windows drive, then replace the driver file
No File line, Info: The boot selection failed because a required device is inaccessible Usable boot configuration data bootrec /rebuildbcd or bcdboot
File: \Windows\system32\config\system The SYSTEM registry hive System Restore from Troubleshoot, Advanced options

The middle one is the case most people meet on home PCs. The Status line is the same in all three, so the Info line is what tells them apart.

Why the BCD goes missing

The BCD is a small database that tells Boot Manager where Windows lives. It sits on the EFI system partition on UEFI PCs, or on the System Reserved partition on older BIOS setups. Cloning Windows to a new SSD, deleting a partition, or a power cut during an update can leave it pointing at nothing. bcdboot copies fresh boot files from your Windows folder and writes a new store, which is why it often works when bootrec reports zero installations.

A less common cause: the wrong firmware mode

If the PC was set to legacy or CSM boot and someone switched it to UEFI, or the other way round, Boot Manager may look on the wrong kind of partition. Open the firmware setup and switch the boot mode back to what it was when Windows was installed, then try again before running any repair command.

Questions

Is 0xc0000225 a hardware failure?

Most often it is missing or damaged boot data, not a dead part. If the drive is not listed in the firmware setup at all, or chkdsk finds many bad sectors, then suspect the drive.

Will Startup Repair or bootrec delete my files?

No. Both work on boot files only. Back up anything important as soon as Windows starts again, in case the drive is failing.

Why do I see 0xc0000225 after a Windows update?

An update that stops halfway can leave the boot configuration or a driver incomplete. Try Troubleshoot, Advanced options, Uninstall updates from the recovery screen before rebuilding the BCD.

What if BitLocker asks for a recovery key?

Most recovery tools need the drive unlocked. Get the 48-digit key from your Microsoft account recovery key page or from your IT department before you start.