Recover files from a dead laptop hard drive

When a laptop dies, its drive usually still works. Remove the SSD or hard drive, put it in a USB enclosure or adapter that matches its connector, and plug it into a working Windows PC. Your files are in Users, under your account name. If the drive is encrypted with BitLocker, you need its 48 digit recovery key. A drive that clicks or is not detected needs a lab.

Checked November 10, 2026 against the manufacturer's own pages.

The short version

What to install and where it comes from. Every link goes to the manufacturer or Microsoft, never to a copy.

Files live inUsers folder, then your account name
What you needScrewdriver and an enclosure matching the drive
Common drive types2.5 inch SATA, M.2 SATA, M.2 NVMe
BitLocker key48 digits, often in your Microsoft account
Chance of recoveryHigh if the drive itself is healthy
Microsoft: find your BitLocker recovery keysupport.microsoft.comMicrosoft: recover lost files with Windows File Recoverysupport.microsoft.comMicrosoft: Disk Management in Windowssupport.microsoft.com

Official files only, nothing bundled

Step by step

  1. Rule out power and the screen

    Try another charger, hold the power button for 30 seconds with the charger unplugged, and connect an external monitor. A laptop with a broken screen or a dead charger still has a working drive, and you may be able to copy files from it directly.

  2. Find the drive and its type

    Unplug the charger and, if possible, the battery. Open the bottom cover with the screws listed in the maker's service manual. Look for a 2.5 inch drive with a SATA plug or a small M.2 stick. M.2 sticks are SATA or NVMe; the label or the notch pattern tells you which.

  3. Get a matching enclosure or adapter

    Buy a USB enclosure or a USB adapter made for that exact type. An M.2 SATA drive will not work in an NVMe only case, and the reverse is also true. Some cases support both.

  4. Connect it to a working Windows PC

    Plug in the enclosure and open File Explorer. The drive appears with one or more letters. If it does not, open Disk Management and give its main NTFS volume a letter. Never accept a prompt to initialize or format this disk.

  5. Unlock BitLocker if asked

    If Windows asks for a password or recovery key, use the 48 digit recovery key. Microsoft lists your Microsoft account recovery key page at aka.ms/myrecoverykey, a work or school account, a printout, or a USB stick as the places it may be stored.

  6. Copy your user folder

    Open the drive, then Users, then your account name. Copy Desktop, Documents, Pictures, Videos and Downloads to the working PC. If Windows says you do not have permission, choose Continue to get access as an administrator.

  7. Scan only if files are missing

    If the drive reads but files are missing, run winfr with the laptop drive as the source and the PC's drive as the target, for example winfr F: C: /regular /n *.docx. Do not scan a drive that clicks or disconnects; send it to a recovery lab.

If the free methods found nothing

Deleted files usually stay on the drive until new data overwrites them. A recovery program reads the drive directly, lists what can still be saved and lets you preview it before restoring. Save recovered files to a different drive.

Find and preview your deleted files

Scans hard drives, USB sticks and memory cards, including quick-formatted ones, and shows what can be recovered.

Auslogics File Recovery 12 · Free scan and preview · NTFS, FAT, exFAT · Windows 11, 10, 8, 7

Why the files usually survive when the laptop does not

Laptops stop working for many reasons that have nothing to do with storage: a failed charging port, a dead motherboard, liquid on the keyboard, a broken hinge or screen. In most of those cases the drive is a separate part that holds its data with no power at all. Moving it to another computer turns a dead laptop into an ordinary external drive. Windows reads the NTFS volume as normal, and your user folder is exactly where you left it.

The exception is a drive that failed by itself. A hard drive that clicks, or an SSD that never appears in Disk Management on any PC, has a hardware fault. Software cannot fix that, and repeated attempts can make it worse.

BitLocker and device encryption

If the drive is encrypted, the files on it are unreadable without the key, even with the drive in your hands. Microsoft’s support page describes the recovery key as a 48 digit number and lists where it may be stored, starting with your Microsoft account. Look up the key on another device before you open the laptop, so you know you have it. If no key can be found, Microsoft states that it cannot provide or recreate one, and the data stays locked.

Before your next laptop fails

Turn on OneDrive folder backup for Desktop, Documents and Pictures, or File History to an external drive. Confirm that your BitLocker recovery key appears in your Microsoft account and print a copy. Both steps take minutes and mean a dead laptop costs you hardware, not files.

Questions

My laptop's storage is soldered to the board. What can I do?

Some thin laptops have no removable drive. The files can then only be read by repairing the laptop or through a specialist who works on the board. Ask the laptop maker's repair service before trying anything yourself.

I never set up BitLocker. Why does the drive ask for a key?

Encryption may have been switched on when the laptop was first set up, and the key is then saved to the Microsoft account used at the time. Sign in at the recovery key page from another device and match the key ID.

Can I put the old drive inside my new laptop?

You can if the slot and type match, but connect it with a USB enclosure instead. Booting a new laptop with two Windows drives inside can confuse startup, and you only need the files.

The drive clicks or is not detected in the enclosure. What now?

Try one other enclosure or PC. If it still clicks or does not appear in Disk Management, stop. Repeated power cycles can damage a failing drive further. A professional data recovery lab is the right next step.