LC9 E3.L NVMe SSD driver

Device details

PCs and boards that use this chip

Each line is a subsystem ID: the full hardware ID ends in SUBSYS_ plus these eight characters when the LC9 E3.L NVMe SSD is built into that maker's product.

If your SUBSYS matches a laptop or board maker in this list, that maker's support page has the version tested for your model.

How to install the driver for LC9 E3.L NVMe SSD

1. Confirm the ID. In Device Manager, right-click the device, open Properties, then Details, and pick Hardware Ids. The first line should start with PCI\VEN_1E0F&DEV_003D.
2. Try Windows Update. Settings, Windows Update, Advanced options, Optional updates. Firmware and storage drivers are rarely offered here.
3. Check your PC maker. Enter your model or serial number on its support site and look under Storage.
4. Use the chip maker's package. NVMe Features Supported by StorNVMe (Microsoft Learn) on learn.microsoft.com. Our do you need an nvme driver? guide explains which package fits.
5. Restart and check. Open Disk Management and check the drive is listed.

Other KIOXIA nvme ssd IDs

• VEN_1E0F&DEV_0036 NVMe SSD Controller CD9P U.2
• VEN_1E0F&DEV_0037 NVMe SSD Controller CD9P E3.S
• VEN_1E0F&DEV_003A NVMe SSD Controller BG8 (DRAM-less)
• VEN_1E0F&DEV_003B Exceria Basic NVMe SSD (DRAM-less)
• VEN_1E0F&DEV_003E LC9 E3.S NVMe SSD
• VEN_1E0F&DEV_003F LC9 U.2 NVMe SSD
• VEN_1E0F&DEV_0040 Exceria G3 PCIe 5 NVMe SSD (QLC) (DRAM-less)
• VEN_1E0F&DEV_0042 NVMe SSD Controller LD4